Operating profiles

Combilift industries: technical requirements before truck selection

Compare aisle geometry, load length, peak factor and temperature constraints across verticals. Combilift treats each profile as an engineering envelope—not a decorative icon row.

Industry grid

Four columns of warehouse contexts that change truck duty

Timber & lumber

Long packs, outdoor yards and variable overhang dominate steer-mode choice.

Metals & pipe

Bundle weight, nesting and floor class drive residual capacity reviews.

Manufacturing

Work-order outbound mixes pallet and fixture lengths inside shared aisles.

Distribution centers

Peak waves need buffer assumptions and exception recovery ownership.

Cold chain

Temperature, condensation and door-open time alter tire and battery duty.

Building materials

Mixed SKU depth with long boards and palletized finishes in one layout.

Plastics & profiles

Lightweight long loads still need aisle envelope and tip-risk checks.

Multi-client warehouses

Client-specific peaks share trucks; duty logs must stay separable.

Technical requirements

Compare the inputs that decide Combilift truck fit

Use this table in RFQ packages so peak throughput claims include SKU mix, buffering and recovery assumptions.

Requirement Timber / metals Manufacturing DC Cold / multi-temp
Primary load unit Long packs, bundles, pipes Pallets + occasional long fixtures Pallets / totes with condensation risk
Aisle & geometry Narrow guide aisles, outdoor transitions Shared WIP and outbound aisles Door seals and restricted staging
Peak factor Seasonal yard surges Work-order release waves Dispatch windows vs door-open time
Safety / traffic Yard pedestrian routes, tip risk AMR coexistence possible Fogged optics and floor traction
Acceptance focus Residual capacity at length Interface owners & cutover Battery / tire duty under temperature
Selection considerations

Combilift truck choices sit on real warehouse trade-offs

Industrial truck packages do not resolve every dispute in warehouse automation. The sections below state opposing positions so capital and operations teams can decide which risk they prefer to own.

Peak rate vs operational resilience

Peak throughput view: Size the fleet to the highest order lines per hour window when SKU velocity is stable and buffer occupancy is predictable.

Resilient flow view: Keep spare trucks, aisle width margins and mean time to repair targets so a single hydraulic or battery event does not collapse the dispatch window.

Combilift RFQs ask for both the design peak and the recovery path. A peak claim without exception ownership is incomplete.

Greenfield optimization vs brownfield phasing

Greenfield view: Optimize aisle width, charger rooms and residual capacity placards in one layout pass before live waves begin.

Brownfield view: Stage cutover bay-by-bay, accept temporary mixed fleets with AGV/AMR coexistence rules, and prove SAT under constrained floor class and existing rack faces.

Neither path is universally correct. The wrong choice is publishing a brochure rate that ignores the live operating boundary.

Specification inputs Combilift records before quoting

  • Rated load (kg) with load center and maximum length stated together
  • Aisle / clear width (mm) for AST or equipment-specific maneuvering clearance
  • Duty cycle including outdoor transitions and steer-mode hours
  • Residual capacity after attachments and pick height are named

Ready to map your operating profile to a Combilift truck package?

Share load unit, peak rate, aisle constraints and interface owners so application engineering can respond with a reviewable scope.

Contact application desk